Kenwood MDX-F1 User Manual

21
Operation
MDX-F1 (EN)
Playback of Mini Disc
Contents
÷ When no track name (track title) and no disc name (disc title) has been recorded, “NO TITLE” is displayed.
÷ “BLANK DISC” is displayed when not even one track has been recorded. (When there is a disc title, the disc
title will be displayed.)
When a title recorded in a MD disc is too long to be
displayed in the dot display, press this key to scroll the
display and view the characters which has not be dis-
played.
This key is also used to switch the dot display modes (see
figures below).
(When pressed during stop or playback) (When pressed during MD recording)
Each press switches the information.
1 Title display
2 Title scroll display
3 Pressing during title scroll display 2
shows the available recording time
of the MD.
(Return to 1 after title scroll display.)
(The display returns to 1 in 5 seconds.)
Each press switches the information.
1 Recording input display
2 Available recording time of MD
KENWOOD
001 R54:32
001 R54:32
CD
DISPLAY
/CHARAC.
NWOOD
Title display

Kenwood MDX-F1 Specifications

Amplifier Section

rated output power during STEREO operation	4 W + 4 W
speaker unit	80 mm, cone type

Tuner Section

FM tuning frequency range	87.5 MHz ~ 108 MHz
MW (AM) tuning frequency range	531 kHz ~ 1, 602 kHz

General Specifications

power consumption	38 W
standby power consumption	0.3 W
dimensions (W x H x D)	464 mm x 182 mm x 243 mm
weight (net)	5.4 kg