Kenwood MDX-F1 User Manual

MDX-F1 (EN)
16
Operation
Playback of CD
Contents
Repeated playback
You can repeatedly listen to a favorite track or disc. (The REPEAT key is provided only on the main unit.)
Select the “CD” input. #
Setup for repeating a single track or all tracks
1 Confirm that the “PGM” indicator
is not lit.
(If the “PGM” indicator is lit, press the
PGM key to turn it off.)
Each press switches the repeat mode.
1 “REPEAT”
Repeats playback of a single
track.
2 “ALL REPEAT”
Repeats playback of all tracks
in a disc.
3 Off.... Repeat deactivated
Confirm that this is not lit.
Lights
Setup for repeating selected tracks
Start playback To stop repeated playback
Press the REPEAT key repeatedly until the
repeat mode is switched off.
CD
6
6
CD
÷ The “REPEAT” or “ALL REPEAT” indicator turns off
and the repeat play mode is canceled.
CD
TRACK NO.
01 000
3 ALL 3 REPEAT
CD
TRACK NO.
01 000
3 REPEAT
CD
ALL 3 REPEAT
TRACK NO.
01 000
PGM
REPEAT
2 Select “REPEAT”.
Lights
CDMCD
TRACK NO.
01 000
PGM
ALL 3 REPEAT
REPEAT
Lights Lights
(Main unit)(Remote control unit)
2 Select “REPEAT”.
1 Program the track sequence
according to steps 1 to 2 of
“Listening in the desired se-
quence”.
%
÷ The “REPEAT” and “PGM” indicators light up.
Each press switches the repeat mode.
1 “REPEAT”
All of the programmed tracks
will be played repeatedly.
2 Off.... Repeat deactivated
When the single repeat, select the track number.
$

Kenwood MDX-F1 Specifications

Amplifier Section

rated output power during STEREO operation	4 W + 4 W
speaker unit	80 mm, cone type

Tuner Section

FM tuning frequency range	87.5 MHz ~ 108 MHz
MW (AM) tuning frequency range	531 kHz ~ 1, 602 kHz

General Specifications

power consumption	38 W
standby power consumption	0.3 W
dimensions (W x H x D)	464 mm x 182 mm x 243 mm
weight (net)	5.4 kg