KERN CFS - Counting System Setup Procedures; KERN CCS Counting System Configuration

• Addition in summation
memory
• Display total weight
/number of weighings / total
quantity
• At numeric input digit selec-
tion to the right
• Data output
(menu setting see
chapter 12.2)
• Set or call-up PLU,
see chpt. 11.3
• Tolerance control,
see chpt. 11
• Call up menu
• Switch-over balance,
see chpt. 8.3
• Input of the average piece
weight by weighing, see
chapter 10.1
• Numeric input of the aver-
age piece weight see chap-
ter 10.2
• Function /parameter selec-
tion
• Switch-over weighing unit
• Taring key • Confirm
• Zeroing key
• Back to menu/weighing
mode
CFS/CCS-BA-e-1013 15