KERN CFS Operating Manual

6.3.3 Display quantity
Here the current piece quantity (PCS = pieces) or in totalizing mode the sum
Sum of the placed parts is displayed, see chapter 9.
The arrows [T] above the symbols show:
Tolerance control in counting mode
Tolerance control in weighing mode
+
Goods to be weighed above tolerance limit
TOL
Goods to be weighed within tolerance range
-
Goods to be weighed below tolerance limit
6.4 Keyboard overview
Choice Function in Weighing mode Function in Menu
…..
• Numeric keys
• Decimal point
• At numeric input number
selection to the left
• Delete key
14 CFS/CCS-BA-e-1013

KERN CFS Specifications

General

Brand	KERN
Model	CFS
Category	Scales
Language	English