Display of tolerance mark T, if weighing goods within the specified tolerance:
Display of tolerance mark T, if weighing goods above the specified tolerance:
The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „ „ see chpt. 12.2)
For tolerance control, just one limit value can be set.
If both limit values are deleted, the tolerance control is deactivated.
11.2 Tolerance control in counting mode
Operation Display
Press , the active tolerance weighing mode is
indicated.
If necessary, with "Tolerance control weighing
mode" select [ ]
Press , the currently set upper limit value is dis-
played.
Using numeric keyboard enter desired value e.g. 50
items or delete using
.
Press , the currently set lower limit value is dis-
played.
Using numeric keyboard enter desired value e.g. 40
items or delete using .
30 CFS/CCS-BA-e-1013
To Next Page
Loading...
Need help?
General
