KERN CFS - Average Piece Weight Input and Optimization; Numeric Input and Automatic Reference Optimization

17.1 Error messages
Error message Description Possible causes
Zeroing range exceeded
due to switching-on balance
or pressing (normally
4% max)
• Object on the weighing
plate
• Overload when zeroing
• Improper adjustment
• Damaged weighing cell
• Damaged electronics
Keyboard error
• Improper operation of
the balance
Value outside the A/D
changer range
• Weighing plate not in-
stalled
• Damaged weighing cell
• Damaged electronics
Adjustment error
• Improper adjustment
Should other error messages occur, switch balance off and then on again. If the
error message remains inform manufacturer.
46 CFS/CCS-BA-e-1013