24 CIB-BA-e-2010
7.6 Counting with target piece number
This function can be used to program a target number of pieces. Reaching the target
value is now supported by an optical and an acoustic signal:
Placed piece number less
than target value
Display background
illumination lights yellow
Slow beeping
The placed piece number
corresponds to the target
value
Display background
illumination lights green
No beeping
Placed piece number over
target value
Display background
illumination lights red
Fast beeping
7.6.1 Set target piece number
First determine the piece weight as
specified in chap. 7.1 or 7.2.
(example)
Press and enter target piece
number via the numeric keyboard.
(example)
Acknowledge with . „On“ is shortly
displayed, the function is enabled.
The balance changes automatically into
target piece counting mode.
(example)
Count-in the parts, when display green and no signal sounds, the target piece
number is reached.
To Next Page
Loading...
Need help?
General
