26 CIB-BA-e-2010
The balance changes automatically to
the prompt for entering the upper limit
value. Enter upper limit value and
confirm with .
„on“ is displayed shortly.
The balance changes automatically into
tolerance weighing mode.
(example)
Count-in parts; when the piece number is within the tolerance range, the display
background illumination changes to green.
Note:
If in the display appears:
a wrong input was entered.
Finish the input by and enter the values anew.
Delete tolerance value:
In weighing mode press , enter „000000“ and confirm by .
To Next Page
Loading...
Need help?
General
