KERN FCB Operating Instructions

30 TFCB-A_TFCB-B-BA-def-2313
English
According to the selected application in the application menu just appear the applica-
tion-specific settings, so that you reach the target quickly without deviation.
• Information about the application-specific settings you will find in the de-
scription of the respective application.
• All basic settings and parameters, which influence the whole operation of
the balance, are resumed in the Setup Menu (see chap. 14.3)
These settings remain valid for all applications.
• The number of the available applications depends on the model.
Change application:
 Press the TARE button and keep it pressed until the first menu item of the setup
menu will be displayed
 Use the  button to select the menu setting < mode > and acknowledge with
➔ button. The current setting will be displayed.
 Press the  button to select the required unit and confirm by pressing the ➔
button.

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g