KERN FCB Operating Instructions

TFCB-A_TFCB-B-BA-def-2313 31
English
11 Application <Weighing>
How to carry out a simple weighing and taring, please refer to chap. 9.2 or 9.4. Fur-
ther specific settings you will find in the following chapters.
Shouldn’t the application <Weighing> already be enabled, select the menu
setting < mode >  < weih >, see chap. 10
11.1 Application-specific settings
Call up menu:
 Press the TARE key and hold it until < apcmen> is displayed.
 The display changes to < wghmod> followed by < Ptare>.
 Navigation in menu see chap. 14.1
Overview (not verifiable models):
Level 1
Level 2
Level 3
Description / Chapter
Ptare
PRE-TARE
actuAl
Take over the placed weight as PRE-TARE value, see chap.
11.2.1
manuAl
Numerical input of the tare weight, see chap. 11.2.2
CLEAR
Delete PRE-TARE value
hold
-
Start-Hold function, see chap. 11.3
Unit
Units
available weigh-
ing units, see
chap. 1
This function defines in which weighing unit the result will be
displayed, see chap. 11.4.1
pcs
Application unit counting
FFA
Multiplication factor see chap. 11.4.2
%
Application unit for determining percentages
see chap. 11.4.3
mode
Applications
wei h
Weighing
see chap. 10
count
Counting
check
Check weighing

KERN FCB Specifications

General

Brand	KERN
Model	FCB
Category	Scales
Language	English