KERN FCB Operating Instructions

TFCB-A_TFCB-B-BA-def-2313 17
English
7.8.1 External adjustment < CalExt >
 Press and hold the TARE and ON/OFF buttons simultane-
ously to enter the setup menu.
 Wait until the first menu item < Cal> is displayed.
 Confirm by ➔ button, < CalExt> will be displayed.
 Confirm by pressing the ➔ button, the first selectable ad-
justment weight is displayed.
 Use the navigation keys  to select the desired adjust-
ment weight, see chap. 1 „Adjustment points“ or „Recom-
mended adjustment weight“
 Prepare the required adjustment weight.
 Acknowledge selection by ➔ button.< Zero >, < Pt ld
> followed by the weight value of the adjustment weight to
be placed will be displayed.

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g