KERN FCB Operating Instructions

36 TFCB-A_TFCB-B-BA-def-2313
English
11.4.2 Weighing with multiplication factor via the application unit <FFA>
Here you determine with which factor the weighing result (in gram) will be multiplied.
By that way, e.g. a known error factor in the weight determination can be immediately
taken into account.
 Select menu setting < unit> and confirm on ➔ button.
 Use the navigation keys  to select the setting < FFA >
and confirm on ➔ button.
 Enter multiplication factor, numerical input
see chap. 3.2.2, the active digit flashes.
11.4.3 Percent weighing by application unit <%>
The application unit <%> allows to check the weight of a sample in percent, based on
a reference weight.
 Select menu setting < unit>.
 Place a reference weight which corresponds to 100 %
at the upper display
margin
at the upper display
margin

 Acknowledge by ➔ button.
 Use the navigation keys  to select the setting < % > and
confirm on ➔ button.
 Confirm the flashing weight value of the reference weight
using ➔ button.
 From now on the weight of the sample will be shown in
percent based on the reference weight

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g