KERN FCB Operating Instructions

24 TFCB-A_TFCB-B-BA-def-2313
English
9 Basic Operation
9.1 Turn on/off
Start-up:
 Press the ON/OFF button.
The display lights up and the balance carries out a selft-
est.
Wait until the weight display appears
The scales are now ready for operation using the last ac-
tive application
Switching off:
 Keep ON/OFF button pressed until the display disap-
pears
9.2 Simple weighing
 Check zero display [>0<] and set to zero with the help of
the ZERO key, as required.
 Place goods to be weighed on balance
 Wait until the stability display appears ( ).
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided.
This could damage the instrument.
Exceeding the maximum load is indicated by the display “ ”. Unload bal-
ance or reduce preload.

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g