TFCB-A_TFCB-B-BA-def-2313 41
12.2.2 Target counting
The <Target counting> application variant allows weighing of goods within set toler-
ance limits in keeping with a determined target quantity.
Reaching the target quantity is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks).
Optical signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target quantity within defined tolerance
Target quantity below defined tolerance
Acoustic signal:
The acoustic signal depends on the menu setting
< setup beeper >, see chap. 14.3.1.
To Next Page
Loading...
