KERN FCB

44 TFCB-A_TFCB-B-BA-def-2313
English
13 Application < Checkweighing >
13.1 Application-specific settings
Call up menu:
 Press the TARE key and hold it until < apcmen > is displayed.
 The display changes to < chkmod> followed by < Limits>.
 Navigation in menu see chap. 14.1
Overview:
Level 1
Level 2
Level 3
Description / Chapter
target
Target weighing,
see chap. 13.2.1
value
Target weight, numerical input, see chap. 3.2.2
errupp
Upper tolerance, numerical input see chap. 3.2.2
errlow
Lower tolerance, numerical input see chap. 3.2.2
clear
Delete settings
limits
check weighing,
see chap. 13.2.2
limupp
Upper limit value, numerical input see chap. 3.2.2
limloW
Lower limit value, numerical input see chap. 3.2.2
clear
Delete settings
Ptare
PRE-TARE
actuAl
Take over the placed weight as PRE-TARE value, see
chap.11.2.1
manuAl
Numerical input of the tare weight, see chap. 11.2.2
CLEAR
Delete PRE-TARE value
mode
Applications
weih
Weighing
see chap. 10
count
Counting
check
Check weighing
Shouldn’t the application <Checkweighing> already be enabled, select the
menu setting < mode >  < check >, see chap. 10