KERN FCB Operating Instructions

46 TFCB-A_TFCB-B-BA-def-2313
English
Procedure:
1. Define target weight and tolerances
 Use the navigation keys  to select the setting
< target > and confirm with ➔ button.
< value > is displayed.

 Confirm on ➔ button, the numeric input window appears.
The active digit is flashing.
 Enter target weight (numerical input see chap. 3.2.2) and
confirm the entry.
The balance returns to the < value > menu.
 Use the navigation keys  to select the setting
< Errupp> and confirm on ➔ button.
 Use the navigation keys  to select the weighing unit and
confirm on ➔ button.


 The numeric input window appears. The active digit is
flashing.
 Enter the upper limit for the weight deviation (numerical in-
put see chap. 3.2.2) and confirm the entry.
The balance returns to the <Errupp> menu.

KERN FCB Specifications

General

Calibration	External
Weighing plate material	Stainless steel
Protection Class	IP54
Weighing units	g, kg, lb, oz
Display	LCD, with backlight
Power supply	AC Adapter / Batteries
Operating temperature	10 °C - 40 °C
Minimum part weight at piece counting (Counting scale)	0.1 g