To Next Page

To Previous Page

TFCB-A_TFCB-B-BA-def-2313 49

English

 Use the navigation keys  to select setting < limlow >.



 Press ➔ button to confirm, the numeric input window for

entering the lower limit value will appear. The active digit is

flashing.

 Enter lower limit value (numerical input see chap. 3.2.2)

and confirm the entry.

The balance returns to the < limlow> menu.

 Press repeatedly  button to exit menu.

Finished the setting works, the weighing balance will be ready

for checkweighing.

2. Start tolerance check:

 Place the weighed material and check by means of the tolerance marks / acoustic

signal if the weighed material is within the defined tolerance.

Load below specified to-

lerance

Load within specified to-

lerance

Load exceeds specified

tolerance

The entered values will remain valid until new values are entered.

To delete the values, select menu setting < limits >  < clear >

and confirm on ➔ button.

KERN FCB Operating Instructions

Other manuals for KERN FCB