KERN PCB User Manual

TPCB-A-BA-e-2314 23
7.9.4 Gravitational constant place of location < grause >
 Press and hold the TARE and ON/OFF buttons simultane-
ously to enter the setup menu.
 Wait until the first menu item < Cal > is displayed.
 Confirm by ➔ button, < CalExt > will be displayed.
 Use the navigation keys to select   < grause>.
 Acknowledge using ➔ button, the current setting is dis-
played. The active digit is flashing.
 Enter weight value and confirm using the ➔ button, nume-
rical input see chap. 3.2.2.
Weighing balance returns to menu.
 Press repeatedly  button to exit menu.

KERN PCB Specifications

General

Category	Precision balance
Calibration	External
Display	LCD
Weighing units	g, oz, lb
Housing material	Plastic
Material	Stainless steel
Interface	RS232