KERN PCB User Manual

Name: KERN PCB
Brand: KERN
Rating: 5 (1 reviews)

66 pages

To Previous Page

66 TPCB-A-BA-e-2314

17 Error messages

Error message

Explication

zlimit

Zero setting range exceeded

UnderZ

Zero setting range not achieved

instab

Load instable

wrong

Adjustment error

Underload

Overload

Lo Bat

Capacity of batteries / rechargeable batteries ex-

hausted

Table of Contents2
Technical Data5
Declaration of Conformity8
Appliance Overview9
Components9
Operating Elements10
Keyboard Overview10
Numerical Input11
Overview of Displays11
Basic Information (General)12
Proper Use12
Improper Use12
Warranty12
Monitoring of Test Resources13
Basic Safety Precautions13
Pay Attention to the Instructions in the Operation Manual13
Personnel Training13
Transport and Storage13
Testing Upon Acceptance13
Packaging / Return Transport13
Unpacking, Installation and Commissioning14
Installation Site, Location of Use14
Unpacking and Checking15
Assembling, Installation and Levelling15
Mains Connection15
Battery Operation (Optional)16
Rechargeable Battery Operation (Optional)17
Load Rechargeable Battery17
Connection of Peripheral Devices18
Initial Commissioning18
Adjustment18
External Adjustment < Calext19
External Adjustment with User-Defined Adjustment Weight < Caleud20
Gravitational Constant Adjustment Location < Graadj22
Gravitational Constant Place of Location < Grause23
Basic Operation24
Turn On/Off24
Simple Weighing24
Zeroing25
Taring25
Change-Over Button (Standard Settings)26
Switch-Over Weighing Unit27
Display Gross Weight Value28
Underfloor Weighing29
Operating Concept30
Application <Weighing32
Application-Specific Settings32
PRE-Tare33
Take over the Placed Weight as PRE-TARE Value33
Enter the Known Tare Weight Numerically34
Data-Hold Function34
Weighing Units35
Setting Weighing Unit35
Weighing with Multiplication Factor Via the Application Unit <FFA36
Percent Weighing by Application Unit36
Molar Weighing Mode37
Application <Counting38
Application-Specific Settings38
Using the Application39
Piece Counting39
Target Counting42
Application < Checkweighing45
Application-Specific Settings45
Using the Application46
Target Weighing46
Checkweighing49
Menü51
Navigation in the Menu51
Application Menu51
Setup Menu52
Overview < Setup52
Communication with Peripheral Devices Via KUP Connection57
KERN Communications Protocol (KERN Interface Protocol)58
Issue Functions59
Add-Up Mode < Sum59
Data Output after Pressing the PRINT Button < Manual61
Automatic Data Output < Auto62
Continuous Data Output < Cont62
Data Format63
Servicing, Maintenance, Disposal64
Cleaning64
Servicing, Maintenance64
Disposal64
Instant Help for Troubleshooting65
Error Messages66

Other manuals for KERN PCB

Operating Manual37 pages

Questions and Answers:

Need help?

Do you have a question about the KERN PCB and is the answer not in the manual?

KERN PCB Specifications

General

Category	Precision balance
Calibration	External
Display	LCD
Weighing units	g, oz, lb
Housing material	Plastic
Material	Stainless steel
Interface	RS232

Related product manuals