EasyManuals Logo

KERN PCB User Manual

KERN PCB
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
30 TPCB-A-BA-e-2314
9 Operating concept
From factory the balance is delivered with various applications (weighing, check
weighing, counting). After the first start-up the balance is in the <Weighing> applica-
tion.
In the application menu (see chap.13.2.) however, you can define, selecting an ap-
plication, in which mode the balance after switching-on has to continue working. Eit-
her as per standard in weighing mode or e.g. in check mode or counting mode.
Selecting an application:
Press the TARE key and hold it until
< apcmen > is displayed.
The display changes to < wghmode> followed by
<Ptare>.
Use the TARE-button to select the menu setting <mode>
and acknowledge with button.
The last active application, e.g. < weih > is displayed.
Use the TARE-button to select the desired application, se-
lectable
wei h
Weighing
count
Counting
check
Check weighing
Acknowledge selection by button.

Table of Contents

Other manuals for KERN PCB

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KERN PCB and is the answer not in the manual?

KERN PCB Specifications

General IconGeneral
CategoryPrecision balance
CalibrationExternal
DisplayLCD
Weighing unitsg, oz, lb
Housing materialPlastic
MaterialStainless steel
InterfaceRS232

Related product manuals