KERN PCB User Manual

32 TPCB-A-BA-e-2314
10 Application <Weighing>
How to carry out a simple weighing and taring, please refer to chap. 8.2 or 8.4.
Further specific settings you will find in the following chapters.
Shouldn’t the application <Weighing> already be enabled, select the menu
setting < mode >  < weih >, see chap. 9
10.1 Application-specific settings
Call up menu:
 Press the TARE key and hold it until < apcmen> is displayed.
 The display changes to < wghmod> followed by < Ptare>.
 Navigation in menu see chap. 13.1
Overview:
Level 1
Level 2
Level 3
Description / Chapter
Ptare
PRE-TARE
actuAl
Take over the placed weight as PRE-TARE value, see chap.
10.2.1
manuAl
Numerical input of the tare weight, see chap. 10.2.2
CLEAR
Delete PRE-TARE value
hold
-
Start-Hold function, see chap. 10.3
Unit
Units
available weigh-
ing units, see
chap. 1
This function defines in which weighing unit the result will be
displayed, see chap. 10.4.1
pcs
Application unit counting
FFA
Multiplication factor see chap. 10.4.2
%
Application unit for determining percentages
see chap. 10.4.3
mol
Molar weighing mode, see chap. 10.4.4
mode
Applications
wei h
Weighing
see chap. 9
count
Counting
check
Check weighing

KERN PCB Specifications

General

Brand	KERN
Model	PCB
Category	Scales
Language	English