KERN PCB - Weighing Units; Setting Weighing Unit

TPCB-A-BA-e-2314 35
10.4 Weighing Units
10.4.1 Setting weighing unit
 Select menu setting < unit> and confirm on ➔
button.
 Wait until the display flashes.
 Use the navigation keys  to select the weighing
unit and confirm on ➔ button.
• For the required settings of an application unit (FFA, %, mol) selection,
please see chap. 10.4.2, 10.4.3 and 10.4.4.
• Using the button (standard setting) you can switch between the ac-
tive unit 1 and unit 2 (standard setting of buttons, see chap. 8.5. Other
setting options, see chap. 13.3.1).