KERN PCB User Manual

TPCB-A-BA-e-2314 41
 Enter piece weight, numerical input
see chap. 3.2.2, the active digit flashes.
 Acknowledge by ➔ button.
The balance is now in piece counting mode counting all
units on the weighing plate.
2. Parts counting

 If necessary, put on and tare the weighing container.
 Fill the counting quantity. The piece quantity is shown di-
rectly in the display.
Use the to switch between piece quantity and weight display (standard
setting see chap. 8.5).

KERN PCB Specifications

General

Category	Precision balance
Calibration	External
Display	LCD
Weighing units	g, oz, lb
Housing material	Plastic
Material	Stainless steel
Interface	RS232