KERN PCB User Manual

TPCB-A-BA-e-2314 55
buttons
Key allocation
change
spush

lpush
default
Standard settings, see
chap. 8.5
off
Button disabled
unit
Set weighing unit, see
chap. 10.4.1
mode
Select weighing application,
see chap. 9
hold
Execute HOLD function,
s.Kap. 10.3
*only for the application
<Weighing>
ptare
Open PRE-Tare settings,
see chap. 10.2
*only for the applications
<Weighing>, <Check-
weighing>
ref
Set reference quantity, see
chap. 11.2.1
*only for the application
<Counting>
limits
Open settings for
checkweighing, see chap.
12.2.2
*only for the application
<Checkweighing>
target
Open settings for target
weighing, see chap. 12.2.1
*only for the application
<Checkweighing>
Blight
Display background il-
lumination
mode
always
Background lighting of display is switched
on permanently
timer
The background illumination is automati-
cally switched-off according to the time wi-
thout load change or without operation defi-
ned in menu item < Time >
No bl
Display background illumination always
switched off
Time
5 s
Definition, after which time the background
illumination is automatically switched-off
without load change or without operation.
10 s
30 s
1 min
2 min
5 min
30 min

KERN PCB Specifications

General

Category	Precision balance
Calibration	External
Display	LCD
Weighing units	g, oz, lb
Housing material	Plastic
Material	Stainless steel
Interface	RS232