Kessel Ecolift - Page 35

35
15 parameters are displayed
1.5.1 Power on directory
1.5.2 Activation lock
1.5.3 Activation directory 1
1.5.4 Post run time 1
1.5.5 Max flap closures 1
1.5.6 Max power flap 1
1.5.7 Max run times
1.5.8 SDS (Self Diagnosis System)
1.5.9 Operating mode
1.5.10 Activation category 2
1.5.11 Post run time 2
1.5.12 Max cycles PU
1.5.13 Max power PU
1.5.14 Min power PU
1.5.15 Max run time
Activation delay after power outage
Default setting – 2 seconds
Open (no settings)
Open (no settings)
Display Description Information
Activation delay of backwater flap
is displayed
Default setting – 2 seconds
Open (no settings)
Open (no settings)
The maximum flap activations are
displayed
Default setting is 5000 meaning that after 5000
backwater flap closures, an alarm will sound and
a motor replacement will be recommended
4. Control unit operation
The maximum motor current is dis-
played