36
Display Description Information
The activation delay time of the
pump is displayed
The post run time of the pump is
displayed
The maximum pump activations is
displayed
If this alarm is acknowledged then a second
alarm will sound after an additional 1000
pump activations.
4. Control unit operation
Maximum pump current is displayed
The pump is protected from damage
The total number of flap closures in a
specified timeframe is displayed
Default setting is 30
The timeframe between two Self Dia-
gnosis Tests (SDS) is displayed
Default setting is 28 days.
The information is for KESSEL Customer Ser-
vice partners only
To Next Page
Loading...
