120 Keysight E5061B Service Guide
Messages
Error Messages
-
Error Messages
An error message is displayed against a red background in the instrument
message/warning area in the lower left part of the screen. Pushing a front
panel key or executing :DISP:CCL command clears the error message. Errors
caused by the operation of a front panel key simply appear on the display. They
are not stored in the error queue with some exceptions.
An error with a positive error number is one uniquely defined for this
instrument. On the other hand, an error with a negative error number is
basically one defined for common GPIB devices in IEEE488.2
Error messages are decribed in WebHelp. Please kindly refer to Keysight
Website below.
http://ena.support.keysight.com/e5061b/manuals/webhelp/eng/product_inf
ormation/error_messages/error_messages.htm
Warning Message
A warning message is displayed in the instrument message/Warning area in
the lower left part of the display against a gray background. Pushing a front
panel key or executing :DISP:CCL command clears the message.
This message simply appears on the display, being not known to a remote
environment such as a GPIB. This message is not displayed when another error
(against a red background) has already been displayed in the instrument
message/Warning area.
The warning messages for this instrument are described in WebHelp. Please
refer to Keysight website.
http://ena.support.keysight.com/e5061b/manuals/webhelp/eng/product_inf
ormation/error_messages/warning_message.htm
To Next Page
Loading...
Need help?
General
