Keysight Agile Signal Generator Service Guide 5
Troubleshooting
Overall Description
The overall description provides a function overview of the Keysight UXG agile
signal generators. The major functional blocks shown in the "Assemblies and
Modules" and "Analog RF Block Diagram" are described in this section.
— A1 Front Panel
— A2 Power Supply
— A3 Fan Module
— A4 Mother Board
— A5 Infrastructure Board
— A6 CPU Carrier
— A7 CPU
— A8 Solid State Drive
— A9 External PCIe I/O Board
— A10 Midplane
— A11 Reference Module
— A12 DAC Board
— A13 Rear Panel I/O Port Module
— A14 Lowband/Highband Switch
— A15 RF Deck Interface
— A16 Frequency Multiplier
— A17 Agile Mod/Filter
— A18 Lowband Output Module
— A19 40 GHz Doubler (Option 540/54E)
— A20 Output Leveling Module
— Frequency Generation
— RF Output Connector
To Next Page
