Keysight N5991 Test Automation Software Platform Getting Started Guide 45
Using the Software 5
Once all the procedures are run, the N5991 configuration can be stored as
a single “.vfp” file using SAVE button and recalled using LOAD button
without configuring the DUT again.
Before executing the calibration or test procedures, ensure that the
Station Configuration is conducted properly with all necessary
instruments such as the Infiniium oscilloscope set to “online”. All
calibrations can be run in offline mode, that is, without any instrument
connected. The offline mode is intended for product demonstrations with
simulated data. CALIBRATIONS RUN IN OFFLINE MODE DO NOT
GENERATE VALID CALIBRATION DATA.
To Next Page
Loading...
