1st Menu Level 2nd Level 3rd & 4th Levels Description
TrigSource Specifies the transient and CD Arb trigger source
Control Initiates, triggers, and aborts transients; displays trig state
Protect OVP Configures over-voltage protection settings
OCP Configures over-current protection settings
Inhibit Configures inhibit input mode settings
WDog Configures output watchdog protections settings
Clear Clears protection conditions and displays output status
States Reset Resets all instrument settings to the reset (*RST) state
SaveRecall Saves and recalls instrument settings
PowerOn Selects the power-on instrument state
System IO LAN Settings Viewthe currently active network settings
Modify Modify the network configuration
(IP, Name, DNS, mDNS, Services)
Apply Applies the configuration changes and restarts unit
Cancel Cancels the configuration changes
Reset Performs an LXI LCI resetof LANsettings and restarts
Defaults Resets the network to the as-shipped defaults and restarts
USB Displays USB identification string
GPIB Display or change the GPIB address
DigPort Pins Configures the individual digital port pins
Data Reads/writes data to the digital port
Groups Function Specifies the master or slave function
Master Discovers and connects the master to the slave units
Slave Specifies the slave address
SDS Status Returns the connection status of the SD1000A Safety DisconnectSystem
Config Configures the connection to the SDS unit
Data Input Reads status data from the digital port of the SDS unit
Output Sets the state of the external output signals of the SDS unit
Preferences Clock Sets the real-time clock
Display Configures the screen saver and start-up meter view
1 Quick Reference
22 Keysight RP7900 Series Operating and Service Guide
To Next Page
Loading...
Need help?
General
