10 Keysight 2050/60 X-Series User’s Guide
Figure 2-5 Average power meter measurement results . . . . . . . .46
Figure 2-6 Creating Datalog display view . . . . . . . . . . . . . . . . . . .46
Figure 2-7 Selecting one of the measurements . . . . . . . . . . . . . .47
Figure 2-8 Data preview bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Figure 2-9 Placing a marker on the chart . . . . . . . . . . . . . . . . . . .48
Figure 2-10 Creating a trace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Figure 2-11 Performing calibration and zeroing . . . . . . . . . . . . . . .49
Figure 2-12 Setting the frequency . . . . . . . . . . . . . . . . . . . . . . . . . .50
Figure 2-13 Setting the trace scales . . . . . . . . . . . . . . . . . . . . . . . .50
Figure 2-14 Adding marker or configuring the trace using Tools Palette
controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Figure 2-15 Setting the gates through Instrument Setup tab . . . .51
Figure 2-16 Viewing the power measurement results of the pulse 52
Figure 2-17 Common measurement settings pane . . . . . . . . . . . . .53
Figure 2-18 Datalog settings pane . . . . . . . . . . . . . . . . . . . . . . . . .54
Figure 2-19 Export the data log file . . . . . . . . . . . . . . . . . . . . . . . . .54
Figure 2-20 Save/load the instrument state . . . . . . . . . . . . . . . . . .54
Figure 2-21 Instrument setup (advanced settings) pane . . . . . . . .55
Figure 2-22 Power meter settings in the Average only mode . . . . .56
Figure 2-23 Power meter settings in the Normal mode . . . . . . . . .58
Figure 2-24 Instrument Setup tab . . . . . . . . . . . . . . . . . . . . . . . . . .61
Figure 2-25 Multiple Digital Meter display example . . . . . . . . . . . .63
Figure 2-26 Multi-list display example . . . . . . . . . . . . . . . . . . . . . .64
Figure 2-27 Multi-trace example . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Figure 2-28 Multiple bench display example . . . . . . . . . . . . . . . . .66