Keysight CX3300 Series - Scope Mode and Data Logger Mode

38 Keysight CX3300 User’s Guide, Edition 4
Using the CX3300
Scope Mode and Data Logger Mode
Scope Mode and Data Logger Mode
The CX3300 supports the following two operation modes.
Scope mode Default operation mode of the CX3300
Captures the current waveform by a trigger like an oscilloscope in the sampling
rate up to 1 GSa/s.
Records the waveform data up to 256 Mpts.
Provides dozens of the waveform analysis tools.
Data Logger
mode
Operation mode available for the CX3300 with the option STG
Provides a data logger’s long-duration measurement ability in addition to
benefits of the Scope mode.
Captures a continuous waveform without trigger event and enables to record the
fast waveform sampling rate up to 10 MSa/s.
Records the waveform data for the duration up to 100 hours by using
internal/external storage device (HDD/SSD).
To analyze a huge amount of waveform data measured in the Data Logger mode,
powerful tools are provided: Waveform Trend Analyzer and Waveform Analytics.