Keysight CX3300 Series - Forcing a Default Setup; SSD Recovery

82 Keysight CX3300 User’s Guide, Edition 4
Using the CX3300
Forcing a Default Setup
Forcing a Default Setup
If your CX3300 is not working properly when you start it up, follow these steps to
perform a default setup and return the CX3300 to normal operation.
1. Press the
Default Setup key.
2. If the CX3300 is still not working properly:
a. Press the
Menu key several times to open the Configuration dialog box. The
Menu key is located above the Horizontal control on the front panel.
b. Click Setups to display the Configuration > Setups screen.
c. Click the Factory Defaults button to return the CX3300 to the default
settings it had when it left the factory.
3. If the CX3300 is still not working properly, turn it off.
4. Turn the CX3300 back on. If it does not successfully restart, try recycling the
power again.
5. If the CX3300 still does not successf
ully restart, follow the instructions for
recovering the SSD.
SSD Recovery
Follow these steps to recover your CX3300 solid state drive.
1. Turn off the CX3300.
2. Connect the keyboard to a USB host port of the CX3300.
3. Connect the mouse to a USB host port of the CX3300.
4. Press the Standby switch on the CX3300 front panel.
5. On the Windows boot selection screen, select “Instrument Image Recovery
System”.
6. Follows the on-line instruction to proceed the recovery.