Keysight CX3300 User’s Guide, Edition 4 79
Using the CX3300
Current Waveform Analytics Software
SCPI Control
Current Waveform Analytics Software can be controlled by using SCPI
commands from a control program on an external computer via the LAN
interface. Refer to Keysight CX3300 Programmer’s Guide for the SCPI
commands.
The following protocols are supported by this software. In the default setting, all
protocols are disabled (OFF).
• VXI-11 LAN
• HiSLIP LAN
• TCP/IP Socket
To use this function, access the Configuration dialog box (Configuration >
Interfaces), decide the protocol to use, set its slide switch to ON, and reboot this
software.
To Next Page
Loading...
