Keysight CX3300 User’s Guide, Edition 4 73
Using the CX3300
Waveform Analytics
Waveform Analytics
Waveform Analytics is the function to detect anomalies instantly from a
waveform database. This function is implemented by the following process.
• “Extracting Waveform Segments”
• “Tagging Waveform Segments”
• “Performing Clustering”
This section also describes the following topics.
• “Performing Waveform Analytics by Waveform Recording”
• “Performing Waveform Analytics by Retriggering”
• “Using Waveform Analytics Tool Palette”
Extracting Waveform Segments
Waveform segments are automatically extracted from the waveform database
according to the trigger conditions during the waveform recording or
Retriggering. The trigger conditions can be set by using the Data Logger dialog
box. Refer to the CX3300 online help for details of the setup parameters.
Tagging Waveform Segments
Waveform segments are automatically tagged according to their similarity.
The similarity between waveform segments is calculated, and if the similarity is
greater than the similarity threshold, these segments are tagged with the same.
The similarity threshold can be set by using the Data Logger dialog box. Refer to
the CX3300 online help for this parameter.
The tagging is performed during the waveform segment extraction.
To Next Page
Loading...
Need help?
General
