Keysight CX3300 Series - Power on Screen; Main Waveform

Keysight CX3300 User’s Guide, Edition 4 45
Using the CX3300
Power On Screen
Power On Screen
Just after the CX3300 boots up, the CX3300 will display as shown below.
Main Waveform
The following graphical user interfaces are available on the Main Waveform.
Graph area Displays waveforms, markers, annotations, etc.
Horizontal scale Primary scale area is below the graph area.
Secondary scale area can be above the graph area.
Vertical scale Primary scale
area is on the right side of the graph area.
Secondary scale area can be on the left side of the graph area.
Mode tab Switches the operation mode: Scope or Data Logger.
Run control Run, Stop, and Single icons. Controls waveform acquisition. Same as the
Run,
Stop, and Single keys.
Tool Palette
Main Waveform
Summary Bar
Sidebar
Status Bar
Menu Bar
Position indicator
Timebase position
Run control
Trash bin
Waveform tray
Indicator Tray
Mode tab