10 S-Series Oscilloscopes Service Guide
1 General Information
Instruments Covered by this Service Guide
Oscilloscopes manufactured after the date this manual was released may be
different from those described in this manual. The release date of this manual is
shown on the back of the title page. This manual will be revised when necessary.
If you have an oscilloscope that was manufactured after the release of this manual,
please check the Keysight Technologies website at www.keysight.com to see
whether a newer version of this manual is available.
The following S-Series oscilloscopes are covered in this guide. The oscilloscope
model is identified by the product number on the front panel.
Accessories Supplied
•mouse
•keyboard
•accessory pouch
• front panel cover
•localized power cord
•calibration cable
• N2873A 10:1 500 MHz Divider Passive Probe (one per scope channel)
• 17-channel Flying Lead Set Logic Probe, MSO Cable, and BNC probe tip
adapter (MSO models only)
• Keysight I/O Libraries Media Suite
•Quick Start poster
Model Bandwidth
DSOS804A/MSOS804A 8 GHz
DSOS604A/MSOS604A 6 GHz
DSOS404A/MSOS404A 4 GHz
DSOS254A/MSOS254A 2.5 GHz
DSOS204A/MSOS204A 2 GHz
DSOS104A/MSOS104A 1 GHz
DSOS054A/MSOS054A 500 MHz
To Next Page
Loading...
Need help?
General
