Keysight Infiniium MSOS404A Service Guide

14 S-Series Oscilloscopes Service Guide
2 Calibration
What is a Calibration?
A calibration is simply an oscilloscope self-adjustment. The purpose of a
calibration is performance optimization.
There are two ways to calibrate an Infiniium S-Series oscilloscope:
•A user calibration, also known as a self calibration, includes the minimum set of
calibrations and is intended to be run by oscilloscope users. It can include a
time scale calibration.
•A service calibration is performed only by Keysight Service Center technicians.
The following section describes how to run a user (self) calibration.

Keysight Infiniium MSOS404A Specifications

General

Brand	Keysight
Model	Infiniium MSOS404A
Category	Test Equipment
Language	English