Keysight ixia UHD100T32 - Page 21

Specifications
UHD100T32
Perpetual
Part number: 944-
1180
UHD100T32
Base Subscription
Part number:
U100-BASE
UHD100T32
Standard
Subscription
Part number: U100-
STANDARD
ports ports
Maximum Frame Size 9,216 bytes
Fame Length Controls Fixed, IMIX, Custom
IMIX
Fixed Fixed, IMIX, Custom
IMIX
Value Lists (Max.) per
port
1024/100GE port
512/50GE port
1024/40GE port
256/25GE port
256/10GE port
100/100GE port
100/50GE port
100/40GE port
100/25GE port
100/10GE port
1024/100GE port
512/50GE port
1024/40GE port
256/25GE port
256/10GE port
Hardware Checksum
Generation
Checksum generation and verification for IPv4, TCP/UDP
Link Fault Signaling Reports, no fault, remote fault, and local fault port statistics
Latency Measurement
Resolution
1 nanosecond
Intrinsic Latency
Compensation
Removes inherent latency error from the 100GE port electronics
Receive Feature Specifications
Receive Engine Wire-speed real-time latency and sequence checking capability
Trackable Receive
Flows per Port (Max)
l 100GE: 1,024
l 50GE: 512
l 40GE: 1,024
l 25GE: 256
l 10GE: 256
l 100GE: 16
l 50GE: 8
l 40GE: 16
l 25GE: 8
l 10GE: 8
l 100GE: 256
l 50GE: 128
l 40GE: 256
l 25GE: 64
l 10GE: 64
Minimum Frame Size l 200 bytes at full line rate
l 64 bytes at full line rate on a subset of ports
Standard Statistics
and Rates
Link state, line speed, frames sent, valid frames received, bytes sent and
received, fragments, undersize, oversize, CRC errors, sequence checking
frames, sequence checking errors, ARP, and PING requests and replies
Chapter 1 About UHD100T32
913-2626-01 – 6 –