Keysight N9020A - Page 30

30
Overview
Service Equipment You Will Need
10 dB
Fixed Attenuator
Frequency: 50 MHz to 19.5 GHz
Loss: 10 dB (nominal)
VSWR:
321.4 MHz to 8 GHz: ≤ 1.1:1
8 GHz to 12.4 GHz: ≤ 1.15:1
12.4 GHz to 19.5 GHz: ≤ 1.25:1
Connector: 3.5 mm (m, f)
8493C
(Option 010)
A, P
20 dB
Fixed Attenuator
Frequency: 10 MHz
Loss: 20 dB (nominal)
VSWR: 10 MHz: ≤ 1.20:1
Connector: Type-N (m, f)
8491A
(Option 020)
8491B
(Option 020)
A, P
30 dB
Fixed Attenuator
Frequency: 50 MHz
Loss: 30 dB ± 0.05 dB
VSWR: 1.05 @ 50 MHz
(For use with Low Power Sensors)
11708A A, P
Terminations
Type-N (m)
(for Option 503, 508, 513)
Frequency: 10 kHz to 18 GHz
VSWR: ≤ 1.05:1
909A
(Option 012)
P, T
3.5 mm (f)
(for Option 526)
50 Ω
Frequency: 10 kHz to 50 GHz
909D
(Option 526)
P, T
BNC (m)
(required for Option BBA)
Frequency: 50 Hz to 300 kHz 1250-0207 P
Miscellaneous Devices
RF Power Splitter Frequency: 9 kHz to 3.6 GHz
VSWR: ≤ 1.10:1
Tracking Error: < ± 0.15 δΒ
Connector: Type-N (f)
11667A A, P
Microwave Power Splitter Frequency: 50 MHz to 26.5 GHz
VSWR:
10 MHz to 3 GHz: < 1.22:1
3 GHz to 26.5 GHz: < 1.22:1
Tracking Error: < ± 0.40 δΒ
Connector: 3.5 mm (f)
11667B A, P
Table 1-1 Required Test Equipment
Instrument Critical Specifications Recommended
Model
a
Alternative
Model
Use
b