593
Post-Repair Procedures
Post-Repair Procedures
1. Press Enter to proceed with the Windows XP setup. See Figure 15-24.
Figure 15-24 Windows XP Setup Wizard
2. The Date and Time Settings screen is used to set the appropriate date,
time and time zone. These settings may be configured later by the end
user.
Select Next to continue the Windows XP Setup Wizard.
3. Wait for the Windows XP Setup Wizard to complete. The instrument will
restart itself a few times.
4. Once the Windows XP Setup Wizard has completed the instrument is
ready for the next step of configuration.
To Next Page
Loading...
