EasyManua.ls Logo

Keysight N9030B - 3.3.1 Views; 3.3.1.1 Normal

Keysight N9030B
2852 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Spectrum Analyzer Mode
3.3 Channel Power Measurement
n Results Returned
5 Returns floating point numbers that are the captured trace data of the power (in dBm/resolution BW) of the
signal for Trace 2. The frequency span of the captured trace data is specified by Span
6 Returns floating point numbers that are the captured trace data of the power (in dBm/resolution BW) of the
signal for Trace 3. The frequency span of the captured trace data is specified by Span
7 Returns Marker Table data as a series of comma separated values in the following form:
<Marker Number>,<Marker Trace>,<X>,<Y>,<Reserved>,<Reserved>
Only markers that are enabled are included. <Reserved> are returned as NaN (“Not a Number”, 9.91e+37).
The data is returned in the current sort order as displayed in the Marker Table
Additionally, WLAN Mode supports an n parameter for the following queries:
:FETCh:CHPower:DENSity[n]?
:MEASure:CHPower:DENSity[n]?
:READ:CHPower:DENSity[n]?
For these queries in WLAN Mode only, the results returned depend on the value of n
as follows:
n Radio Standard Results Returned
1 or not
specified
Not 802.11ac 80 +80 MHz
or 802.11ax80 +80 MHz
Peak PSD (Power Spectral Density)
The Peak PSD over the integration bandwidth. The unit bandwidth is
selected by "PSD Unit" on page 642 in either dBm/Hz or dBm/MHz
802.11ac 80 +80 MHz or
802.11ax80 +80 MHz
The first value is the peak PSD for segment 1, the second value is the peak
PSD for segment 2
2 Not 802.11ac 80 +80 MHz
or 802.11ax80 +80 MHz
Mean PSD (Power Spectral Density)
The Mean PSD over the integration bandwidth. The unit bandwidth is
selected by PSD Unit in either dBm/Hz or dBm/MHz
802.11ac 80 +80 MHz or
802.11ax80 +80 MHz
The first value is the mean PSD for segment 1, the second value is the
mean PSD for segment 2
3.3.1 Views
In SA, WCDMA, WLAN, SRCOMMS, and VMA Modes, there is only one predefined
view, the "Normal" on page 554 view.
3.3.1.1 Normal
Windows: "Graph" on page 555, "Metrics" on page 556
Dual window view: Channel Power graph and Channel Power metrics.
Example
:DISP:CHP:VIEW PRES
554 Spectrum Analyzer Mode User's &Programmer's Reference

Table of Contents

Other manuals for Keysight N9030B

Related product manuals