Keysight PNA-X Series Configuration Guide

Page 4
Find us at www.keysight.com
Certification options
Commercial calibration certification with test data
(Option UK6)
Complete set of measurements which tests unit to
manufacturer’s published specifications. Includes calibration
label, calibration certificate, and data report. Conforms to ISO
9001.
ISO 17025 compliant calibration (Option 1A7)
Complete set of measurements which tests unit to
manufacturer’s published specifications. Includes calibration
label, ISO 17025 calibration certificate, and data report,
measurement uncertainties and guardbands on all customer
specifications. Conforms to ISO 17025 and ISO 9001.
ANSI Z540 compliant calibration (Option A6J)
Complete set of measurements which tests unit to
manufacturer’s published specifications. Includes pre- and
post-adjustment data with measurement uncertainty information
compliant to the ANSI/NCSL Z540 standard.
Documentation
The PNA Series instruments are equipped with an Online Help
system available within the instrument in English only. All PNA
documentation is available on the web:
www.keysight.com/find/pna
Calibration software licenses
Built-in performance test software for standard
compliant cal (S93898A)
Adds built-in performance testing and calibration software
for self-maintainers. Requires additional equipment. See the
analyzer’s Service Guide for more information on equipment
required.
Keysight Offers the Following Options for All PNA Family Network Analyzers

Keysight PNA-X Series Specifications

General

Output Power	+13 dBm (typical)
Number of Ports	2 or 4
Dimensions	426 mm (W) x 470 mm (D)
Power Requirements	100 to 240 VAC, 50/60 Hz
Frequency Range	10 MHz to 26.5 GHz (varies by model)