11
2
2
Electric vehicle guide EV menu
3. Check the operation status through
the front indicator of the power outlet.
僅Blue: Standby
僅 Red: No power supply even the
power outlet is connected
僅 Green: Normal power supply
through the normal connection of
the power outlet.
LCD display messages
V2L has ended. Battery level has
reached the set value
A:
V2L has ended. Battery level has
reached the set value
When the high voltage battery level
reaches the discharging limit set level,
the V2L will stop and the warning will be
displayed. If you want to use the V2L
continuously, make the discharging limit
set level lower than the present battery
level.
V2L stopped due to excessive
power use
A:
V2L stopped due to excessive
power use
If you use an electrical appliance that
exceeds the maximum power output the
vehicle can supply, it will stop working
and display a warning message. Make
sure that the total power consumption of
your electrical appliance exceeds the
V2L maximum power output.
V2L conditions not met
A:
V2L conditions not met
If V2L is interrupted for any of the fol
-
lowing reasons, a warning message is
displayed.
僅 V2L connector switch off
僅 V2L connector overheating
僅 Opening the charging door while
using the V2L indoor outlet
Make sure there are no problems with
the V2L connector and the vehicle
indoor outlet.
僅 Do not touch the V2L connector of the
terminal of the vehicle charging hole.
To Next Page
Loading...
