Safety features of your vehicle
84
Seat
僅 The power seat is driven by an electric
motor. Stop operating once the
adjustment is completed. Excessive
operation may damage the electrical
equipment.
僅 When in operation, the power seat
consumes a large amount of electrical
power. To prevent unnecessary
charging system drain, don't adjust
the power seat longer than necessary
while the vehicle is not running.
僅 Do not operate two or more power
seat control switches at the same
time. Doing so may result in power
seat motor or electrical component
malfunction.
Adjusting the rear seat
Adjusting rear seatback angle
Operation
僅 Pull up the seatback recline lever.
僅 Hold the lever and adjust the seat
-
back of the seat to the position you
desire.
僅 Release the lever and make sure the
seatback is locked in place. (The lever
MUST return to its original position for
the seatback to lock.)
Folding rear seatback
Type A
Type B
1
Left side seatback
2
Right side seatback
Operation
僅 Insert the seat belt buckle/webbing in
the pocket/guide.
僅 For type A, pull up the seatback fold
-
ing lever, then fold the seat down.
僅 For type B, pull the seatback folding
lever (1) and (2).
To Next Page
Loading...
