Features of your vehicle
665
Lighting
僅 At times, High Beam Assist may not
work properly. The function is for your
convenience only. It is the responsibil
-
ity of the driver for safe driving prac
-
tices and always check the road
conditions for your safety.
僅When High Beam Assist does not
operate normally, change the head
-
lamp position manually between high
beam and low beam.
Intelligent front-lighting system
(IFS) (if equipped)
Intelligent Front-Lighting System
secures a clear view for the driver with
the high beam on while driving at night.
System setting
A:
Lights
1 Intelligent front-lighting
2 Faster Than 60 km/h
3 Faster Than 40 km/h
4 Faster Than 20 km/h
5 Off
With the vehicle in the ON position,
select
Settings
→
Vehicle
→
Lights
→
Intelligent front-lighting
in the Settings
menu to turn on Intelligent Front-Light
-
ing System and deselect to turn off the
system.
For your safety, change the Settings
after parking the vehicle at a safe loca
-
tion.
System operation
Display and control
Intelligent Front- Lighting System will
operate by following the procedure
below.
僅 Place the headlamp switch in the
AUTO position and push the head
lamp lever toward the instrument
cluster. The Intelligent Front-Lighting
System ( ) indicator will illuminate on
the cluster and the system will be
enabled.
僅 When the system is enabled, the Intel
-
ligent Front-Lighting System will oper
-
ate according to the set speed in the
infotainment system. The initial sys
-
tem is set to work when vehicle speed
is above 40 km/h (25 mph).
僅 The high beam LED partially turns off
if an oncoming vehicle or a vehicle
ahead is detected by the front view
camera.
僅 If Intelligent Front-Lighting System
detects an oncoming vehicle or a
vehicle ahead while driving at high
speed (approximately above 100 km/
h (60 mph), the driver's side head
-
lamp will turn off and only the passen
-