15
6
6
Driving your vehicle Regenerative braking system
Regenerative braking system
The regenerative braking system allows
you to charge the battery when you use
the brakes to stop the vehicle.
Adjusting regenerative braking
with paddle shifter
Operation
僅 Pull the left side ( ) of the paddle
shifter to increase regenerative brak
-
ing and deceleration.
僅 Pull the right side ( ) of the paddle
shifter to decrease regenerative brak
-
ing and deceleration.
Non-operating condition(s)
僅 The left side ( ) and right side ( )
of paddle shifters are pulled simulta
-
neously.
僅 Decelerating the vehicle by depress
-
ing the brake pedal.
僅 Cruise Control or Smart Cruise Con
-
trol is operating.
僅 The regenerative braking system is
activated in 100% charge.
僅 The vehicle is in
SNOW
mode.
僅 The trailer is installed.
Regenerative braking system
according to DRIVE MODE
僅 Initial setting of the regenerative brak
-
ing level and adjustable range vary
according to the selected drive mode.
僅 The setting will return to 1 when the
vehicle is restarted from 0.
僅 For more details, refer to "Drive mode
integrated control system" on page 6-
32.
One pedal driving
The driver can stop the vehicle by pull
-
ing and holding the left side paddle
shifter.
Operation
僅 Pull and hold the left side ( ) of the
paddle shifter while coasting.
僅 When the vehicle speed is above 3
km/h (1 mph), regenerative braking
level will return to the previously set
level when the paddle shifter is
released.
僅 When the vehicle speed is below 3
km/h (1 mph), the vehicle stopping
control will be maintained when the
paddle shifter is released.
僅 While one pedal driving function is
operating, the driver can control the
Drive mode Initial setting
SNOW
0~1
ECO
0~3
NORMAL
0~3
SPORT
0~3