Driving your vehicle
946
Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor
(BVM) (if equipped)
Left side
Right side
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
SVM-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Blind-Spot View Monitor settings
Blind-Spot View
With the vehicle on, select
Settings
→
Vehicle
→
Driver assistance
→
Blind-
spot safety
→
Blind-spot view
from the
infotainment system screen to turn on
Blind-Spot View Monitor and deselect to
turn off the function.
Blind-Spot View Monitor opera
-
tion
Turn signal lever
Blind-Spot View Monitor will turn on and
off when the turn signal is turned on and
off.
Blind-Spot View Monitor
Operating conditions
僅 When the left or right turn signal turns
on, the image on the instrument clus
-
ter will turn on.
Off conditions
Blind-Spot View Monitor will turn off
when one of the following conditions are
satisfied:
僅 When the turn signal is turned off.
僅When the hazard warning flasher is
on.
僅 When other important warning is dis
-
played on the instrument cluster.
To Next Page
Loading...
