Kia EV6 - Page 235

27
6
6
Driving your vehicle Brake system
AUTO HOLD
The AUTO HOLD maintains the vehicle
in a stopped position without depressing
the brake pedal.
Applying AUTO HOLD
Operation
僅 Press the AUTO HOLD button. The
AUTO HOLD indicator will light up in
white.
僅 The AUTO HOLD indicator changes
from white to green when the vehicle
is stopped.
僅 AUTO HOLD will be released auto
-
matically when the accelerator pedal
is pressed in D, R, or manual mode.
The AUTO HOLD indicator will change
from green to white.
僅 Press the AUTO HOLD button again
while pressing the brake pedal to can
-
cel the AUTO HOLD operation.
Operating condition(s)
僅 Brake pedal is depressed after the
vehicle has started.
Non-operating condition(s)
僅 P (Park) gear position is selected.
僅 The EPB is applied.
AUTO HOLD warning messages
Operating condition(s)
僅 When the EPB is automatically applied
from AUTO HOLD
僅AUTO HOLD to EPB conversion is not
working properly
僅 Brake pedal is not applied when the
AUTO HOLD button is pressed
INFORMATION
If the vehicle is restarted with the AUTO
HOLD button pressed, AUTO HOLD will
be in the standby state.
WARNING
To reduce the risk of an accident, do not
activate AUTO HOLD while driving
downhill, Reversing or parking your
vehicle.
NOTICE
僅If the AUTO HOLD indicator lights up
yellow, the AUTO HOLD is not work
-
ing properly. Take your vehicle to a
professional workshop and have the
system checked. Kia recommends vis -
iting an authorized Kia dealer/service
partner.
僅 A click or electric brake motor whine
sound may be heard while operating
or releasing the EPB, but these condi
-
tions are normal and indicate that the
EPB is functioning properly.
僅 If the vehicle is restarted with the Auto
Hold system is in the standby position
or operating, the Auto hold system will
continue to operate in the standby
position.
OCV051012L_2
OCV051013L