63
6
6
Driving your vehicle Blind-Spot Collision-Avoidance Assist (BCA)
Warning timing may vary depending on
the speed of the vehicle approaching at
high speed.
When changing lanes by detecting the
lane ahead, if Blind-Spot Collision-Avoid
-
ance Assist judges that there is a colli
-
sion risk with an approaching vehicle in
the blind spot, it will help avoid collision
by applying the brake.
When you are driving forward out of a
parking space, if Blind-Spot Collision-
Avoidance Assist judges that there is a
collision risk with an approaching vehicle
in the blind spot, it will help avoid colli
-
sion by applying the brake.
Detecting sensor
Front view camera
Rear corner radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Take the following precautions to main
-
tain optimal performance of the detect
-
ing sensor:
僅 Never disassemble the rear corner
radar or radar assembly, or apply any
impact on it.
僅 If there is impact on the rear corner
radar or near the radar, even though
the warning message does not appear
on the cluster, Blind-Spot Safety sys
-
tem may not operate properly. Have
the function be inspected by a profes
-
sional workshop. Kia recommends vis
-
iting an authorized Kia dealer/service
partner.
僅 If the rear corner radars have been
replaced or repaired, have the vehicle
inspected by a professional workshop.
Kia recommends visiting an autho
-
rized Kia dealer/service partner.
僅 Use only genuine parts to repair the
rear bumper where the rear corner
radar is located.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear cor
-
ner radar.
僅 Blind-Spot Collision-Avoidance Assist
may not work properly if the bumper
has been replaced, or the surround
-
To Next Page
Loading...
